Wireless Independent Smoke Alarm

                                   

Model: PA-609

Description:
 *  Ceiling or wall mounting
 *  Easy to install with mounting hardware included
 *  9 Volt battery operated (included)
 *  Suitable for any room
 *  Flash alarm indicator (red)
 *  Test button for easy recommended monthly testing
 *  Low battery signal
 *  Safety clip feature, not allow mounting of smoke alarm
     Without battery installed
 *  photoelectric chamber for early detection from all directions
 *  Loud 85dB alarm signal

Other features:
 *  Power Source: 9V-1X6F22 battery
 *  Operating Current: 10 uA (normal) and 20-50 mA (alarm working)
 *  Sensitivity to smoke: In comply with UL217 and 5446: Part 1 2000
 *  Operating Temperature: 40°F -100°F (4.4- 37.8 degree)
 *  Ambient Humidity: 10- 90 %
 *  Horn Level: 85 Decibels at 10 feet
 *  Alarm Mode: Flash & sound alarm
 *  Battery life: 1 year min
 *  Size: 105 x 25mm
 *  Box size: 34 x 57 x 42cm
 *  Qty/box: 115pcs
 *  Weight: 17.3kg/box

Wire Smoke Fire Detector

                                       

Model: PA-610

Description:
 *  Widely used for room, hall, kitchen, party, no smoking place,
     Hotel, Factory, etc.
 *  Alarm mode: while smoke density reach the limited, it gives off
     alarm warning as well as sending wireless signal to alarm panel,
     high sensitivity, interconnect up to alarm.
 *  Unique "battery missing" lockout.
 *  Customized.

Other features:
 *  Battery operated: DC 9V.
 *  Standard compatible: ISO 12239, EN 54-7, BS 5446-1,
     EN 50134- 2, I-ETS 300220
 *  Photoelectric sensor.
 *  Red LED indicate alarm.
 *  Green LED mains indicator light to confirm
     battery power supply.
 *  Test button, Low battery alarm.
 *  Relay contacts-volt free with Normally open and Normally closed
     options and rated to 24 volts/1 amp resistive.
 *  Alarm supplied with "connector plug" for easy of installation.
 *  Built in sounder to give a minimum sound output of 85dB at 3m.
 *  Senses smoke using the light scatter.
 *  Principle-quick response to visible smouldering smoke.
 *  Test button simulates smoke - use to check performance at least
     monthly
 *  Standby current <10uA, alarm current <30UA.　

Photoelectric Smoke Alarm

                                      

Model: PA-611

Description:
 *  Ceiling or wall mounting new design
 *  Easy to install with mounting hardware included
 *  Suitable for any room
 *  Flash alarm indicator (red)
 *  Test button for easy recommended monthly testing
 *  Low battery signal
 *  Safety clip feature, not allow mounting of smoke alarm
     without battery installed
 *  Photoelectric chamber for early detection from all directions
 *  Loud 85dB alarm signal

Other features:
 *  Power source: 9VDC battery
 *  Operating current: 10uA (normal), 20-50mA (alarm working)
 *  Sensitivity to smoke: in comply with UL217 & BS5446: Part 1 2000
 *  Operating temperature: 40oF - 100oF (4. 4C - 37.8oC)
 *  Ambient humidity: 10% - 90%.
 *  Horn level: 85dB at 10 feet.
 *  Battery life: 1 year min.
 *  Size: 110 x 25mm
 *  Box size: 34 x 57 x 42.5cm
 *  Qty/box: 115pcs
 *  Weight: 17.3kg/box

Photoelectric Smoke Detector

                                       

Model: PA-612

Description:
 *  100V-240V AC input, 9V spare replaceable battery
 *  Inter-connecting (24 alarms maximum)
 *  Special protection design of wiring module
 *  Convenient installation
 *  Light labyrinth
 *  CMOS design
 *  Best adaptability to environment
 *  Manual testing
 *  High stability
 *  High density SMT design
 *  Unique structure with dustproof, anti-fly and anti-light design
 *  Auto reset function

Other features:
 *  Power input: DC 12V, DC 9V (battery)
 *  Power consumption: ≤ 1W
 *  Operating temperature: -10°C to +50°C
 *  Operating humidity: ≤ 95% RH
 *  Alarm output: sound alarm