Basic Information

Product Description

Wireless Magnet Sensor Seat Belt Transmitter works with Wireless Alarm - Safe and Sound to Use

Model: PA-37 / 44WP-G Wireless Pull Release Seat Belt Transmitter

Giftshine cordless fall monitor has a wireless receiver for signals from cordless bed sensor pad, chair sensor pad, floor sensor mat, and other wireless transmitters. Advanced technology allows this magnet sensor seat belt to work with no cord and delivers wireless signal to receiver monitor.

No Cord Between Pad and Monitor
Reduce tripping hazards and eliminate broken or scrambled cord around chair. Suitable for hospitals and nursing homes.

Features:
1) Can be used on wheelchair.
2) Can help to prevent fall accidents and ensure personal safety.
3) Works with wireless alarm receiver / monitor.
4) It is suitable for residents / elderly with low agility.
5) The wireless alarm receiver / monitor sounds immediately when magnet switch is released from the belt, alerting caregiver to a potential fall.

Seat Belt Installation:
1) Place seat belt on the wheelchair.
2) Fix the belt ends to the wheelchair frame.

How to Use:
1) Open the seat belt by pulling the red belt which has magnetic switch.
2) Put it around the patient's waist, then place the red belt back on its place. 
3) Turn on the transmitter power switch, and the seat belt transmitter is ready to work as the standby mode.
4) Pull the red belt and the transmitter will deliver wireless signal to the alarm receiver / monitor.